Events at Department of Energy Technology

Industrial/PhD Course: Power Electronics – from Fundamentals to Advanced Topics


27.09.2022 kl. 08.30 - 30.09.2022 kl. 16.30



Professor Huai Wang,


Professor Huai Wang, Aalborg University
Assistant Professor Haoran Wang, Aalborg University
Assistant Professor Subham Sahoo, Aalborg University
Guest Postdoc Yi Zhang, Aalborg University

ECTS:  4


The course was initiated in 2020 aiming to lay a solid foundation in power electronics could be beneficial to them independent of which power electronic topics they are working on, which provides also a wider scope of power electronics besides their specific research topics. It will have in-depth introduction of circuit theories, modeling methods, and hands-on prototyping of power electronic converters. The emphasis is on those aspects that are generic and not limited to specific applications.  Moreover, a design case study will be used during the entire course for illustrating how to implement a converter prototype step-by-step, from component sizing, circuit design, control, simulation, prototyping, and testing.  PCB assemblies will be available for the participants to perform laboratory testing. 

Day 1: Power electronic circuit theories + design case (Lecturer: Huai Wang, 8:30-16:30)

It will cover the topics: duality in time and circuit elements, state-plane switching trajectories; inductor-capacitor based switching circuits, switched-capacitor circuits, switched-inductor circuits, zero-ripple techniques, interleaved techniques, extra element theorem, circuit operation-mode analysis, etc.

Day 2: Power electronic modeling and control methods + design case (Lecturer: Haoran Wang and Subham Sahoo, 8:30-16:30)

It will cover the topics: how a “switch” can be removed for converter modeling; origins of time-domain and frequency-domain modeling methods and its limitations; basic ideas of time-domain control methods for power electronic converters and its advantages and limitations; most widely used frequency-domain control methods for power electronic converters; what are the common and different aspects in modeling and simulation of Si, SiC and GaN devices.   

Day 3: Magnetic component modeling and design + design case (Lecturer: Huai Wang, 8:30-16:30)

It will cover the topics: magnetic diffusion, core losses, winding losses, high-frequency magnetics, integrated magnetics, and magnetic circuit representation, design considerations, etc.

Day 4: Power electronic converter prototyping and testing (Lecturer: Haoran Wang and Yi Zhang, 8:30-16:00)

This is a continuation of the design case for actual prototype implementation and testing. It will cover the topics: PCB design techniques and considerations; participants make their own magnetics and be given PCB assemblies; run tests in the lab)


 A basic understanding of power electronic components, topologies, and control methods are necessary, the participants are supposed to have already attended a master-level power electronic course or equivalent.    

Form of evaluation: 

Converter case study design and testing report.


6000 DKK for PhD students outside of Denmark and 8000 DKK for the Industry.


AAU Energy


Aalborg University, Pontoppidanstræde 101, room 1.015, 9220 Aalborg East

Registration Deadline

06.09.2022 kl. 23.59

Register at

More information